Backyard Pool Patio Contractor Westbury Long Island NY
Backyard pool patio installed by Gappsi in Westbury NY with natural stone pavers.
Scogli di mare limestone pool coping, 6×9 Melfi limestone random pattern and in lays of 6×9 scogli di mare pavers. Stoop and cocking island veneer were veneered with Fiorito travertine. The all pool and house patio were cleaned with hot water low pressure washing, joints were filled with haze free polymeric sand and sealed with urethane sealer.
Long Island Outdoor Kitchen Islands designers
Outdoor Kitchen Island just completed by Gappsi in Huntington bay Long Island NY. Constructed with Wolf aluminum cabinetry, Fiorito veneer travertine for the side and back of the cabinets. Wolf Cabinets are sturdy and powder-coated finished will withstand the elements. Contact Gappsi at 631-543-1177 for more info.
Putting Green Built in Manorville NY by Gappsi.
This putting green was designed by Giuseppe Abbrancati, with a custom design layout that incorporates 9 holes, a sand bunker and four island of White River rocks. Each island uniquely decorated with rocks and garden ornaments. The surface of the putting green is Go-green synthetic turf Platinum putt with ACADIA 70 oz Pile Height 1-3/4″ for the perimeter fringe. At the center of the putting green a circle design of a limestone pavers was installed for future sitting area.
Snaps-Sports Distributor & installer on Long Island NY
What time of Sand material is best to fill the joints in between pavers?
Polymeric sand is best to use to fill the joints in between pavers. High quality polymeric sand will not leave any stains on the surface. Gappsi vibrates the pavers while sweeping which allows the send to fill the joints tight and also help the sand harden. Sweeping the excess sand off the pavers before wetting the sand is also very important. This prevents the glue that is in the sand to smear the pavers surface. Most importantly, applying a good urethane sealer will further help the sand to harden and prevent ants from digging into the paver joints and weeds from growing on patios.
What is the best sealer for concrete pavers?
There are many manufactures of sealers, from solvents to acrylic urethane. Epoxies, acrylic, and urethanes sealers come in water-based versions and solvent-based versions, including combinations of both. The biggest difference between the two is the VOC content. The sheen and life of the product determines how often it lasts before needing to be reapplied. Solvent-based acrylics tend yellow overtime and don’t allow the concrete breathe. Epoxies are the strongest sealers, but are best used for smoother surfaces and more for indoor or warehouse floor application. The best sealers for paving stones are water-based urethanes. They are algae and mold inhibitors, allow superior joint stabilization, they are environmentally safe, its UV Protection will not harm vegetation, and it is VOC Compliant in all 50 States. Well-trained Gappsi personnel can apply paving stone sealer products achieving the best results.
Do you need to pressure wash pavers before sealing them?
Yes! All concrete and paver surfaces should be cleaned before applying any sealer coating. It is very important that the surface is clean because any stains or materials that get trapped under the sealer will not be able to be cleaned after it’s sealed. Pressure washing pavers is just as important as sealing it.
Using the wrong pressure washing tools could also hurt the pavers. A pressure washer with the wrong nozzle could mark or wear the pavers. The best recommended tool is a high volume, low pressure, hot water pressure washer. The hot water cleans the pavers and prepares the surface for the best result sealing job.
Is it necessary to seal pavers?
Yes! Concrete pavers should be sealed. Paving stones are manufactured with the highest quality cement, but cement is a corrosive material that wears under natural elements.
The sun, rain and cold, can easily wear the surface of pavers, and a good sealing job with the right sealing product, applied by a professional technician of sealing, will create a layer of protection over the paving stones making them water repellent and weather proof. This will protect the concrete surface from corrosion.
A good sealer penetrates the paver surface and stays there for many years, even if the look of the sealer goes away, the color and texture of the pavers will stay new.
Paving Stone Cleaning & Sealer Company Long Island NY
Paving stone driveway installed by Gappsi in 2008, got refurbished with the cleaning and sealing process. Using low pressure hot water the pavers surface gets clean uniformly with no impact of wear on the stone surface. The joints in between the pavers got filled with high quality polymeric sand and vibrated with heavy mechanical plate compactor with rubber rolling system to prevent pavers from getting scratched or damaged. To learn more about Gappsi products, please contact us at 631-543-1177 or visit our web site at http://www.gappsi.com
Swimming Pool Company Dix Hills Long Island NY
Concrete wall vinyl lined Swimming pool Built by Gappsi in Dix Hills Suffolk County NY. With full stadium stairs along shallow end wall, and Fiberglass spillover spas overall pool size is 20 x 40 3.5 to 8 feet deep with a diving board, Salt water chlorine generator and also a full automated safety cover. The masonry and patio were designed and installed by Gappsi, using a combination of Nicolock bayberry roman stones with charcoal borders and circles inlays and trims. To learn more about Gappsi products, please contact us at 631-543-1177 or visit our web site at http://www.gappsi.com
Gappsi Giuseppe Abbrancati 